What is the difference between HeadLOK and TimberLOK?
HeadLok is a version of a TimberLOK with a 5/8″ diameter disc type head. It uses a spider drive recess and driver bit which are supplied with the fasteners. HeadLOK is also available in versions for various thicknesses of steel. HeadLOKs can be used in nearly any place a TimberLOK can.
How long should TimberLOK screws be?
TimberLOK replaces 3/8″ lag screws and is approved for use in ACQ pressure treated lumber. There is no need to predrill with TimberLOK.
Are TimberLOK screws structural?
FastenMaster® TimberLok® Structural Screws – No Predrilling – Stronger than 3/8″ Lags! The FastenMaster® TimberLok® Heavy Duty Wood Screw can replace 3/8″ lag screws and enables you to complete wood-to-wood projects faster, easier and stronger.
What is the diameter of a TimberLOK screw?
1 OlyLog and TimberLOK Fasteners: The OlyLog and TimberLOK fasteners have a 5/16-inch (7.9 mm) hex- head, rolled threads and a gimlet point. They have a proprietary corrosion-resistant coating with a lubricious clear top coat.
What are LedgerLOK screws used for?
LedgerLOK is a code-compliant structural wood screw engineered to fasten a deck ledger board to the rim joist of a house with no predrilling.
Do Timberlok screws need pilot holes?
TIMco Index screws & Fastenmaster Timberlok screws are a great cost-effective alternative to coach bolts. They have structural approval for use in construction applications, do not need pre-drilling, come in a range of sizes & head options, and are incredibly fast & easy install.
Are Timberlok screws good?
These timberloc screws are fantastic! Built a retaining wall using 6x6s and I put one of these 10″ screws every 2-3 ft. It really pulled it in tight, and with a impact driver it was easily 5 times faster and easier than using stakes. It feels way more secure.
What size ThruLOK do I need?
SKU Selections
| ThruLOK SKU Selection Guide | ||
|---|---|---|
| LENGTH | WOOD DIM RANGE | TYPICAL APPLICATIONS |
| 6 1/4″ | 4 1/2″ to 5 1/4″ | 4×4 deck posts to 2x rim joists connections |
| 7″ | 5 1/4″ to 6″ | 2x beams to a notched 6×6 post connections |
| 8″ | 6 1/4″ to 7″ | 4×4 posts to double rim joist or single rim joist and 2x blocking |
Should LVLS be glued together?
LVL beams are long pieces of lumber that are usually used for grand windows and wide doorways. With wooden LVL beams, you must use extremely adhesive glue; not using strong enough glue will cause your wooden structures to collapse.
How far apart should lag bolts be on a ledger board?
The fasteners must be compatible with pressure-treated lumber to prevent corrosion. Typically, you will need to install your bolts alternating high and low 2″ from the top and bottom of the ledger board. As a rule of thumb, bolts can be spaced 16″ on center for supporting joist span up to 12′ in length.
What is a timberlok?
Its sharp point and aggressive threads zip right into the densest woods. A 6″ TimberLOK is a code-compliant way to attach rafters or trusses to a double top plate. TimberLOK is tested and supported by engineering data that conforms to the most current ICC standards.
What is the size of a timberlok screw?
LENGTHS: 2 1/2″, 4″, 6″, 8″, 10″ PACKAGING QUANTITIES 12 pc clamshell, 50 pc box, 250 pc bucket 500 pc bucket (21/2″ only) DESCRIPTION TimberLOK is a heavy duty wood screw available in a variety of lengths and packaging sizes for applications such as attaching rafter or trusses to the top plate, landscape timbers, fences, decks,
What is the permissible lateral load-carrying capacity of timberlok fasteners?
The permissible lateral load-carrying capacity of TimberLok fasteners can be evaluated for any combination of wood member thickness using Annex G of BS5268-2, based on the following parameters: A screw diameter (d) of 4.8mm A design yield moment (My,d) of 11300 Nmm
Do I need to predrill with timberlok?
There is no need to predrill with TimberLOK. Its sharp point and aggressive threads zip right into the densest woods. A 6″ TimberLOK is a code-compliant way to attach rafters or trusses to a double top plate. TimberLOK is tested and supported by engineering data that conforms to the most current ICC standards.