What is Catalyst 2950?
The Cisco Catalyst 2950 Series is a line of fixed-configuration, stackable, and standalone switches that provide wire-speed Fast Ethernet and Gigabit Ethernet connectivity.
How do you reset a 2950 switch?
Step 1: turn off/on the switch while holding the button down for roughly 15 seconds. Step 2: You will be able to view the led lights blink, and now the switch should have reset to default on system restart once you release the mode button.
How do I access the Cisco 2950 switch?
Click the “Start” button and select the “Run” box and type “hypertrm” and press the “Enter” key and the HyperTerminal program will appear. Type a name for the session, such as “Cisco 2950” in the “Name:” field and click the “OK” button.
Is Cisco 2950 a managed switch?
The Catalyst 2950 switch is managed and can be controlled through a command line interface.
Is Cisco 2950 end of life?
The product is no longer for sale after this date. The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time. The last date that Ciso Engineering may release any final software maintenance releases or bug fixes.
How do I reset my Cisco 2950 password?
Follow the password recovery procedure below.
- Attach a terminal or PC with terminal emulation (for example, Hyper Terminal) to the console port of the switch.
- Unplug the power cable.
- Power the switch and bring it to the switch: prompt:
- Issue the flash_init command.
- Issue the load_helper command.
How many console port does a 2950 24 switch contain?
The Catalyst 2950 LRE switch has four physical input ports that are logically bundled as two ports. Each logical port consists of a copper 10/100/1000 port and a fiber-optic SFP module slot.
How do I reset my Cisco 2950 to factory settings?
Reset a switch running Cisco IOS Software to factory defaults
- Enter “enable” mode by typing:
- The console prompt should change from “switch>” to “switch#” to signify this.
- To reset the switch to factory default, issue the erase startup-config or write erase command.
Does Cisco 2950 have PoE?
Cisco 2950 Switches (Non PoE)
Is a Cisco 2950 a Layer 3 switch?
The Cisco Catalyst 2950, Cisco 2960 series are typical examples of Layer 2 switches. The Cisco Catalyst 3550, 3560, 3750, 4500, 6500 series would be good examples of Layer 3 switches.