Why did my camshaft break?

A broken camshaft is usually caused by a connecting rod or other rotating part coming loose and striking it. Sometimes the cam will break after a short time of use because of a crack or fracture in the cam due to rough handling during shipping or improper handling prior to installation.

What should the timing be on a Ford 302?

Registered. 16 degrees, initial, 36 total for mine. If you want to optimize your timing, you will need to get your distributor recurved accurately and find out how much mechanical advance it has, then shoot for 36-38 degrees of total advance.

How do you advance timing on a Ford 302?

To advance, turn the distributor clockwise. The revs will rise and the timing will advance. Once you have done this, turn off the motor and see if it still starts “easily”.

How much HP does a 351 Cleveland have?

Horsepower. The 351 was available as a two-barrel which was a basic engine and a four-barrel, or performance, engine. The two-barrel was rated at 240 horsepower while the four-barrel was rated at 285 horsepower.

Can you change a cam without pulling the motor?

Yes, but just. Obviously you’ll have to remove the distributor, lifters, oil pan, pulies, damper and timing chain and cover. You’ll have to remove the rad and possibly the rad support too. Some folks have had to loosen their engine mounts and jack it up a little or raise the transmission to get clearance .

How do I set up my Y-Cam?

Thank you for choosing Y-cam, setup shouldn’t take long, and we’ll walk you through every step Use the network (Ethernet) cable supplied to connect your Y-cam camera to a spare network port on the back of your router. Connect the power.

What version of Y-Cam is supported on my computer?

The latest version of the software is supported on PCs running Windows XP/Vista/7/8/10, 32-bit. This free program is a product of Y-CAM. The most popular versions of the program 1.5 and 1.4.

How does the Y-CAM work?

The user friendly installation procedure and intuitive web-based interface allows easy integration with your home or business network or Wi-Fi. The Y-cam also comes with motion detection software that can generate alarm triggers via e-mail and by uploading images straight to a website.

How do I set up my Y-cam to record to NAS?

The Y-cam can record video direct to virtually an NAS drive or to its internal microSD memory card. This page will cover how to setup your Y-cam to record to a NAS drive. [Storage Select]Select whether you want to record on NAS or microSD card.