What is the smallest DCC decoder?
The smallest is CT Elektronik decoder DCX76zD/F, Size: 0.27 x 0.24 x 0.07 Inch (6.9 x 6.1 x 1.7 mm ).
What is a 4 function DCC decoder?
4 Function Decoder. Quad DCC Function Decoder with Integrated Transponder. Configurable Strobe feature lets you simulate flashing lights like FRED, Strobes, Mars Lights, etc. on the yellow and white leads. Connector – Wires.
What is DCC programming?
Decoder configuration is the action of entering suitable values into the configuration variables (CVs) in a DCC decoder to set their address, and other parameters so they operate with the characteristics you choose.
How do I restore my decoder to factory settings?
Press the blue “DStv button” on your remote control. Then use the right arrow on the remote control to go to “Settings“. Use the down arrow to go to “System Settings“. Scroll down using the down arrow to select “Reset To Factory Default” then press “OK” on your remote control.
How do I reset my DCC decoder NCE?
(4) Set CV56 to 113 As engine resets you will hear the 3 toots. Test out the locomotive using address 3. QSI also has some selective resets. program on main….Master List of decoder resets.
|Manufacturer||Mfg. ID in CV8||CV for reset + value|
|NCE||11||CV30 = 2|
|Digitrax||129||CV8 = 8|
|LokSound (ESU)||151||CV8 = 8|
|Train Control System||153||CV8 = 8 or CV30 = 2|
What is a DCC decoder?
The DCC decoder has a power circuit that converts the DCC power signal into DC power for the motor and lights. The decoder also has digital logic which uses the power signal information to control the locomotive.
What is a 2 function DCC decoder?
A 2 function decoder can usually control front (1st function) and rear lights (2nd function) which willl be directional and switched on and off by funtion control 0 (zero) on the controller.
Which is the best DCC decoder?
– The Lenz Gold stay alive is by far the best if you need to run your train over some dead track. – If you need a decoder with a jst-9 socket you will have to look elsewhere (Lenz, TCS).