What is ODME in tanker?

What is ODME in tanker?

O.D.M.E is Oil Discharge Monitoring Equipment which is used to check and monitor oil is discharged follow related rule ( MARPOL 73/78 ) when a tanker discharges the sea water from the slop tank where sea water used to clean the tanker after unloading the cargo to be prepared to ship other kind of cargo has been stored.

How do you use ODME?

4) Prepare ODME for operation

  1. Check if the inlet and outlet valves for flow meter are open.
  2. Check if Fresh water supply is available and all valves are open.
  3. Check if sample line inlet and outlet valves are open.
  4. Check if air supply for pneumatic valves is on.
  5. Check if cleaning solution is present in the container.

How does the oil discharge monitoring equipment ODME works?

Oil discharge monitoring equipment (ODME) is based on a measurement of oil content in the ballast and slop water, to measure conformance with regulations. The apparatus is equipped with a GPS, data recording functionality, an oil content meter and a flow meter.

What is the meaning of Odmcs?

Oil discharge monitoring control system
ODMCS (Oil discharge monitoring control system), sometimes also called ODME (Oil discharge monitoring equipment) is an equipment required under Marpol Annex 1 and is required to monitor discharge of oily mixture from cargo tanks of oil tankers.

What are the components of OWS?

OWS consists of mainly three segments:

  • Separator unit. This unit consists of catch plates which are inside a coarse separating compartment and an oil collecting chamber.
  • The Filter unit. This is a separate unit whose input comes from the discharge of the first unit.
  • Oil Content Monitor and Control Unit.

How many nautical miles can discharge the clean oily water?

(d) When more than 12 nautical miles from the nearest land, any discharge of oil or oily mixtures into the sea from a ship other than an oil tanker or from machinery space bilges of an oil tanker; that is not proceeding enroute; shall be in accordance with paragraphs (b)(1), (b)(2), (b)(3), (b)(4), and (b)(5) of this …

Can we discharge oil in special area?

Discharge In Special Areas From Oil Tankers Any oily mixture or oil effluent discharge from the cargo area of an oil tanker into the sea which comes under special area shall be prohibited.

What is slop tank in ship?

Slop tanks are present onboard tanker to store oily water mixture from cargo tank washing. The number of slop tanks depends on the Dead weight Tonnage (DWT) of the vessel. Sludge tank. Located in engine room, this tank is used to store sludge produced after treating fuel or lube oil through purifiers.

What must be done if the ODME should fail during ballast voyage?

Upon failure of the ODMCS, discharge of effluent into the sea via the ODMCS must stop, and an entry must be made in the Oil Record Book. At the time of ODMCS failure, the port State of destination, the Classification Society and this Administration must be immediately notified via fax, email or telephone.

How do OWS work on ships?

Operating Procedure Open the lock and overboard valve. Open all the other valves of the system. 2) Open the desired bilge tank valve from which the oily water mixture is to be discharged from OWS. 3) Open air if the control valves are air operated.

What is OWS system?

An oily water separator (OWS) (marine) is a piece of equipment specific to the shipping or marine industry. It is used to separate oil and water mixtures into their separate components. This page refers exclusively to oily water separators aboard marine vessels.

Can we use OWS in special area?

Discharge In Special Areas From Oil Tankers Any oily mixture or oil effluent discharge from the cargo area of an oil tanker into the sea which comes under special area shall be prohibited. The prerequisites of this regulation shall not affect the discharge of clean or segregated ballast tank.

What is ODME in shipping?

(Part 1) 1) What is ODME? O.D.M.E is Oil Discharge Monitoring Equipment which is used to check and monitor oil is discharged follow related rule ( MARPOL 73/78 ) when a tanker discharges the sea water from the slop tank where sea water used to clean the tanker after unloading the cargo to be prepared to ship other kind of cargo has been stored.

How to set the total oil limit in ODME?

Total oil from the washing that can be discharged = 1 m3 (1000 litres) Set the total oil limit as 1000 litres in ODME. Lets demonstrate this in ODME of make Rivertrace engineering. To set the total oil limit, go to Oil dischrage under Mode selection by pressing the enter button (center one).

How much oil can be discharged from washing machine in ODME?

Total oil from the washing that can be discharged = 1 m3 (1000 litres) Set the total oil limit as 1000 litres in ODME. Lets demonstrate this in ODME of make Rivertrace engineering.

What is the difference between ODME and oil?

“Oil” means all kinds of oil including crude oil, heavy oil, sludge, waste oil and refined oil. ODME is to remove water from the slops and not as much oil as is allowed also.