Is tung oil good for oak worktop?
It is, therefore, important to protect the oak to ensure a long life. The ideal product for oak is Tung Oil because it is a natural product which feeds and nourishes the oak very well, thus giving good protection whilst also being safe for food contact surfaces.
Is tung oil good for kitchen worktops?
Pure linseed oil or tung oil are better suited for treating hardwood worktops as they penetrate timber more effectively than other natural oils. Though it may take a long time, these rub-in oils will naturally dry or cure on their own.
What is the best finish for oak worktops?
We recommend Danish oil as the best treatment to finish a worktop, as it will bring out the natural lustre of the wood whilst offering excellent protection.
How do you protect oak kitchen worktops?
How To Protect Solid Wood Worktops From Water Damage
- Choose a good quality oil such as Danish Oil, which is a blend of tung and polymerised linseed oil (plus a few added extras to help keep your wood looking good).
- Oil every surface of your worktop (including all the edges and the underside).
How do you oil an oak worktop?
Use linseed or Danish oil (available from DIY stores) and a lint-free cloth – microfibre works well. Pour a little oil directly onto the worktop and, using the cloth, spread it over the surface until you have a very thin and even layer. Keep going until you’ve covered all your worktop, then apply another coat.
How often should you oil oak worktops?
With regular oiling, real wood worktops should last for many years and will continue to mature in colour as you apply fresh coats of oil. It is recommended that for the first six weeks after installation, your worktops are oiled as regularly as possible, then approximately every three months thereafter.
Do I need to sand worktop before re oiling?
Sand it, before you oil it Sanding is an essential procedure prior to reoiling. Besides being characterful and enduring, the Solid Wood Kitchen Worktops are also great because you can sand down any scratches or stains that you have on them – hence restore them to their original glory.
What oil do you use on Oak?
We recommend using a tung oil for oak surfaces. This type of oil will maintain the oak’s colour as well as character. However, if you would like to darken the oak, hardwax oil is more ideal. Another popular oil for oak is danish oil.
Can you use Danish oil on oak?
Danish Oil is completely non-toxic and food safe when dry which means in can be used on all oak items and in all environments.
Can I use Danish oil on oak worktops?
Danish oil is a mixture of tung oil and other vegetable oils that can be used to treat wood and keep it looking great for longer. In fact, it is so effective at treating wooden worktops that we have introduced our own special blend -Worktop Express Danish oil for worktops.
Can you seal oak worktops?
TopOil for Sealing Lighter Wooden Kitchen Worktops Osmo TopOil – Food Safe EN 1186 – is a natural hardwax-oil that provides an extremely hardwearing surface finish for natural wood, such as: Oak.
What is the best oil for wooden worktops?
To give your wooden worktops the best possible finish, we recommend utilising Worktop Express Danish oil for worktops for all worktop oiling and aftercare. We advise that you apply at least two – three coats on both the top and bottom surfaces of the worktop, four coats on each edge and six coats on the end grain.
How long does tung oil last on a worktop?
A hard wearing worktop oil that gives protection against E. Coli and MRSA for up to 6 months. A 100% pure, naturally water-resistant tung oil finish that enhances the colour and character of all wood types.
How do you oil a treated hardwood kitchen worktop?
Treated hardwood kitchen worktop. When applying the oil yourself, it is best to apply several thin coats rather than one thick application. Always work the oil into the worktop in the direction of the wood grain for best results.
How many coats of oil do you put on a worktop?
We advise that you apply at least two – three coats on both the top and bottom surfaces of the worktop, four coats on each edge and six coats on the end grain. You may need to leave a gap of up to eight hours between applications (to ensure that each coat of oil is fully absorbed into the timber).