How many instruments can be connected to an SC200?
The SC200 is the most versatile controller on the market. This Universal Controller works with up to 30 digital or analog sensors for up to 17 different parameters. It allows the use of digital and analog sensors, either alone or in combination, to provide compatibility with the broadest range of sensors.
How do I calibrate my SC200?
Published Date
- Menu > Sensor Setup > Calibrate.
- Select 2 pt Depth Cal, enter.
- Select Active, enter.
- Wait for sensor to range stabilize, enter.
- Measure the distance from sensor face to surface water and enter value (set Range), enter.
- Wait for sensor depth to stabilize, enter.
How do you calibrate a Hach ORP probe?
Discard the standard solution after each calibration. If the calibration standard is ZoBell’s ORP/Redox standard solution, calibrate the probe at a solution temperature that is between 0 and 30 °C (32 to 86 °F). If the calibration standard is Light’s solution, calibrate the probe at 25 °C (77 °F).
How do you calibrate a HACH turbidity meter?
- Calibration of the 2100P Turbidimeter.
- Thoroughly clean the sample cell.
- Slowly invert the sample cell 2-3 times.
- use StablCal <0.1 NTU standard.
- Press: READ.
- Follow the previous procedure in steps 5 and 6 for.
- Using Gelex® Secondary.
What is portable turbidimeter?
Portable turbidimeter that measures the turbidity of aqueous samples simply and accurately.
Does swing Caddie work without a ball?
Does swing Caddie SC300 work without a ball? Yes, you can hit shots with it or you can take practice swings and still get feedback on your golf swing. This is great if you’re working on increasing your speed (aka speed training) to try and increase overall distance.
How accurate is the swing Caddie?
Swing Caddie states that the SC300 has a 3% error on ball speed, 3 yard error in Target Mode (user sets target distance), and 5% error on carry distance in Practice Mode.
How often do you calibrate a turbidity meter?
every 90 days
Calibration and Verification Frequency Calibration at least every 90 days and verification at least once per week are required by rule. To be considered an acceptable verification, turbidity measurements greater than 0.5 NTU must be within +/- 10% of the reading assigned to the standard or reference material.
What does the sc200 controller do?
The sc200 controller allows the use of digital and analog sensors, either alone or in combination, to provide compatibility with the broadest range of sensors. It replaces the Hach sc100 digital and GLI53 analog controllers with advanced features for easier operator use.
What is the Hach sc200 controller?
It replaces the Hach sc100 digital and GLI53 analog controllers with advanced features for easier operator use. The sc200 controller platform can be configured to operate either 2 Digital Sensor Inputs, or 1 or 2 Analog Sensor Inputs, or a combination of Digital and Analog Sensor Inputs.
What is the best universal controller for data sheet?
DATA SHEET Controller—Multi-Parameter Hach sc200™ Universal Controller Product Overview One Controller for the Broadest Range of Sensors The sc200 Universal Controller is the most versatile controller on the market.
https://www.youtube.com/watch?v=JzShtP4u5lI