Who makes Nippon Pistons?

Table of Contents

Toyota Motor has a stake in the company. A D&B Hoovers Subscription is your foot in the door to NIPPON PISTON RING CO.,LTD. contact information. Dun & Bradstreet collects private company financials for more than 23 million companies worldwide….

Year	Revenue
2018	531.63
2019	542.41
2020	521.64
2021	430.35

Are Nippon Pistons forged?

NIPPON RACING PISTONS ARE MADE USING 2618 ALLOY AND PROPRIETARY CENTRIFUGAL SPIN CASTING PROCESS AS WELL AS A 6 STEP HEAT TREATMENT PROCESS TO INSURE A PISTON THAT IS JUST AS HARD AS A FORGED PISTON BUT WITH A MUCH LOWER EXPANSION RATE THAN FORGED PISTONS MEANING ENGINES ASSEMBLED WITH NIPPON RACING PISTONS WILL …

Where are Nippon Pistons made?

Nippon Racing is 100% made in Japan and YONG CHIANG PISTON (YCP) is Made in Taiwan.

What are Vitara Pistons?

“These pistons are commonly referred to as Vitaras, and they provide an 8.5:1 compression ratio, and thicker ring lands. Lowering the stock compression ratio lowers compression heat, which raises the detonation threshold and is useful when employing forced induction.

How much power can Vitara pistons handle?

Just get the 20 over and have your block bored a little to fit them to avoid the dreaded vitara piston slap at stock 75mm bore. “They drop compression down to around 8.5:1 depending on the motor and have been said to handle up to 500 hp.

What are ycp pistons?

– YCP pistons are made from a much stronger casting than OEM pistons (AC8A Grade) – 19mm floating wristpins fit aftermarket D16 forged connecting rods. – T-6 Heat treated for greater strength. – Highly resistant to heat.

What are Vitara pistons?

What size are d16 pistons?

Available in 75mm, 75.5mm, and 76mm Engine Bore Sizes. We have pushed the limits of these pistons on our own engines. We currently hold the world record for horsepower on these pistons in a stock sleeved D16Z6.

Are d15 and D16 rods the same?

Re: d15 d16 differences (Btothe3rdDegree) A JDM D15B is the same as a D16Z6 except the stroke is shorter.

What size are Vitara pistons?

They are the 75mm ones (stock bore). Vitaras can create a slapping noise if you just take the stock bore. Here’s a video I grabbed off of youtube. I recommend the 75.5mm pistons.

Is D15B a VTEC engine?

5. D15B VTEC – the analog on injection D15B with VTEC, compression ratio now is 9.3, the power is 130 hp. Produced from 1992 to 1998. Since 1995 the engine has 3-Stage VTEC.